Tape-head support

Case taper tape heads and carton sealer support

Get help with tape-head selection, wear parts and common tape application issues on case tapers and box sealers.

Case taper tape head support and carton sealer spare parts

Tape heads affect seal quality

A case taper can only seal consistently if the tape head is in good condition and matched to the tape. Wear or contamination can cause poor wipe-down, bad cuts or tape drag.

Selecting the right tape-head details

Tape width, roll core, adhesive and machine mounting style should be checked before replacing or servicing a tape head.

Common symptoms

Problems include tape not cutting, tape not sticking, tape flagging, inconsistent tape length and cartons catching around the head.

Information to send

Provide photos, machine details, tape width, current symptoms and, if possible, a short video of the carton passing through the sealer.

Next step

For a practical recommendation, send carton dimensions, packed case weight, tape details, target output and photos of the current packing area. The aim is to match the case taper to your cartons and workflow, not to force a standard machine into the wrong process.

Use the case taper quote form or call 01494 623015.

Case taper tape heads and carton sealer support FAQ

Can tape heads be replaced?

Often yes, but compatibility with the machine and tape must be checked.

Why does tape not stick properly?

Possible causes include tape type, cold or dusty cartons, poor pressure, worn rollers or carton quality.

What photos are useful?

Send a close-up of the tape head, the tape path and the finished carton seal.

Describe where the tape fault appears

A useful fault report identifies the location on the finished case: leading tape leg, top or bottom centre section, trailing leg or cut end. Photograph the whole seal and a close view of the fault. Include whether the symptom affects every carton or follows a change of board, tape or carton size.

Keep the tape-head identity separate from the main machine identity. Record the upper or lower position and any readable part reference from a safe, stationary condition. Follow the machine’s authorised isolation and inspection procedure; a support enquiry does not require an operator to reach into moving equipment.

Material history: Provide the tape roll reference and width, carton description and any recent material change. Retain examples that show the defect.
Observed sequence: Explain whether tape feeds but fails to cut, cuts but lifts, or applies unevenly. These are different observations and should not be merged into “not working”.

Can a replacement head be chosen by tape width alone?

Request compatibility confirmation using the machine and head identification, mounting arrangement and tape details. Width alone does not define the complete assembly.